Saturday, May 7, 2016

THE PROM DRESS!

WHEW!!!!!! That was a doozy!!!



(in the first pic the belt had twisted around! haha!)


The inspiration








Copied from PR (cause I'm tired!)

I actually combined the bodice of Burda 03/2013 #133 with the skirt of Simplicity 2442. I decided to put the review under the dress because the bodice was more what I was going for than the (relatively simple) skirt of the Simplicity pattern.

This pattern is from the March issue; so it's the wedding issue! While I have good sewing skills; I do not draft or drape and needed to find a pattern to mimic the bodice lines and went straight to the March issues of the mag! AND I already had this issue in my collection. SCORE!

Pattern Sizing:

Burda tall sizes 72 - 88 (36-44). I used a size 36 with adjustments.

Fabric Used:

I used a satin from Hancock Fabrics in bone, antique gold lace and nude illusion both from Vogue Fabrics.

Pattern alterations or any design changes you made:

I cut the sleeve length in the muslin phase to give this cap sleeved look. I cut the bodice pieces in all 3 fabrics, changed the neckline of the satin to a sweetheart, and cut it down so that the illusion was featured. I cut the lace to mimic the sweetheart (3 cheers for applique scissors!!!).

After getting it sewn and ready to do the final fitting, the back was too small. I was going to leave a keyhole in back but the top would not meet. DD has a VERY broad back. So while the muslin was just fine, in the fashion fabric it was off by a good 2 inches.  So I cut the back to a V-shape and again, mimicked that with the lace and illusion. It worked very well.



She has on jeans under the dress here. 
Crazy kid!
She got tired of me making her get undressed to try it on!



The fix! 


I couldn't quite figure out how to do the satin waistband and tulle skirt integrated into the dress so with Catina's help (thanks!) I made the tulle overlay a separate piece. I measured the waistband and used the satin to make the belt. It is full interfaced and is closed in back with hook and eye.

I cut strips of the tulle about 8" wide and 'draped' it on the dressform. When I went to transfer this to the belt it looked wimpy. So I added another layer beneath with very wide pleats. Still too wimpy. So I add several panels of gathered tulle. "Make it work!" :)

I added 6 inches to the skirt length (Yes. 6"!). DD was wearing heels but moreso because she has a 34" inseam. I used a 1 1/4" hem on the skirt.

On the bodice I had to trim out a couple of inches in circumference. E.g., it would have worked better had this come in a size 34. I also removed about an inch in length from the bodice AFTER doing the adjustment to bring this from tall to regular. She has a short torso and long legs.

Lastly, the zipper goes up to about mid-back (just over the bra strap), as I didn't want to deal with a zipper in the illusion. In the end it really worked out great because of turning the back to a v.

To hem the illusion, I folded over the seam allowance (finger pressing works fine), sewed at 3/16" and then *VERY* carefully trimmed away the excess. Tedious but it gives a neat finish.

Conclusion:

I had some serious moments of doubt and panic that I could give her what she wanted. But I am SO glad that I took on this task! The dress is so pretty on her and I am very proud of my work.


More pictures!!!! I posted some on Instagram too. I've cut out the friends for the blog post photos. though.


I really love how the illusion hemming turned out! 



A glimpse of the back!



I mentioned Catina from PR helping me with some logistical stuff. But a special thanks to Jess who blogs over at Sometimes Sewist. She's gotta have a hundreds text messages about this danged dress! :) Lots of suggestions, lots of encouragement and lots of listening! :)