Tuesday, October 4, 2016

Burda Challenge 9/2016 #113

Sometimes a plan just comes together!

So far, I have sewn from every Burda issue this year (even October!). The moment this preview was released I was thinking "must make that dress. must." And then the tech drawings came out and it was a surety. And THEN, when I broke my fabric fast, I saw this printed ITY and knew that this would be one awesome dress.

I went with my normal Burda sizing of 40 neckline/shoulders and 42 for the rest. Especially with the skirt being gathered (vs something fitted). I made no other adjustments for fit. Next time (I can see this in black!!), I will take out about 3/8" from shoulder to bust and about 5/8" from the back length.

Speaking of...I'm starting to question if I actually have a swayback or if I just have a short torso. I mean, I know my torso is short, but is that the reason I have issues vs. swayback?? When patterns have a shaped center-back seam, I don't have puddling. And I often find after the fact, that I need to ALSO shorten a bit at the side seam. Same for pants...I need to shorten front crotch length quite a bit, but I also take out a bit at the side seam of front and back to overall shorten the length from waist to crotch. Ahhh...ruminations.

ANYWAY! Aside from wishing I'd taken out a bit of length in the upper bodice (or as a cheat taken deeper shoulder seams), I cut out my skirt rectangles and somehow managed to rotate the front skirt. When I assembled the back and went to put it on my dress form I stepped back and OOPS! LOL! The back was much shorter than the front. That also explains why I knew I'd cut the skirt to match the front bodice motif (mostly) and then it didn't. I just shrugged it off. :) So I have a few less gathers in front than intended. :)

We are heading into fall/winter so my photos will likely get progressively worse :( I don't have a good open area (that's what happens when you cut your living space in half!) and the sun goes down so early during the week. So you'll get to know my kitchen and yellow table well! :)


I ADORE this print and the overall color scheme!!!

The front IS riding up a little. Full bust problems. I'll fix that...



My super cheesy grin says it all! It's Love!

On the black version (whenever I get the fabric for it), I'll add a couple inches to the length. Though, by the time it's cool enough to wear this with the turtleneck and all, I'll likely wear tights with it anyway.

I finished the hems by double turning and stitching with a twin needle. I slip-stitched the collar facing down by hand. The instructions have you ditch stitch but that seems dicey with the type of fabric you'd likely use for this. No way was I going to try that with ITY! I did however attach the facing to the lining by machine. That was no problem. I always do this as a 2nd pass, so I can use the zipper stitching as a guide.

Oh and I did insert a full length zipper but it is unnecessary. A 9" would be fine. I'd also consider using a tricot fusible in the collar. The back stands up due to the zipper but the front collapses a bit.

I started my daughter's dress last night! I got the front and back bodice seams sewn and the front skirt.

 Today I hope to get the back skirt assembled and the zipper in. Then sleeves (they are raglan), skirt to bodice, side seams, neck binding, hem, done! By Friday night! :)


 Lastly, I was on the hunt for fun skirts (still) and dug up some older Burda mags that were gifted to me. ALL of these awesome patterns are from the 9/2007 issue. Burda always gets better with time it seems!  I think the pleated skirt has a place in my fall/winter wardrobe! I have a winter white pinwale corduroy that I think will be perfect.